(AMC) Aerospace Materials Corporation - Item # SRPF500
Home
|
About Us
|
Products
|
Services
|
Industries
|
Manufacturers
|
Technical Information
|
Request Information
|
Contact Us
Wire and Cable
Heat Shrink Tubing
and Sleeving
Cable Ties
and Lacing Tape
Search our Catalog :
By Part Number
By Keyword
All Categories
>
Heat Shrink Tubing and Sleeving
>
Sumitube K3 - Very Flexible Polyvinylidene Fluoride Tubing
>
MIL-W-16878D Type E 600 Volt Wire
>
Sumitube R10 - Flexible Chlorinated Polyolefin Tubing
>
QQ-W-343/S Tinned Copper Flat Braid
>
Standard Cable Ties - 7.5"
>
QQ-B-575A Tinned Copper Tubular Braid
>
Intermediate Cable Ties - 8"
>
Sumitube K - Semi-Rigid Polyvinylidene Fluoride Tubing
>
Item # SRPF500
Item # SRPF500
Printable Page
Email This Page
Save To Favorites
larger image
SUMITUBE K is a translucent semi-rigid, inherently flame retarded, heat-shrinkable PVDF tubing, that is recognized by Underwriters' Laboratories (UL) Subject 224 with a VW-1 rating and meets or exceeds the requirements of AMS-DTL-23053/8C.
SUMITUBE K is tough and abrasion resistant in mechanical environments. It has excellent properties for cut-through and solvent resistance.
Shrink temperature is 170° C.
Operating temperature range is -55° C to +175° C.
SUMITUBE K is recommended for applications for strain relieving components such as soldered connections and splices which are in high continuous operating temperature environments. The material is good for applications where abrasion resistance is important.
Specifications
·
Physical
·
Electrical
·
Chemical
Specifications
Size
1/2
Min. Inside Diameter As Supplied
0.500 Inches
12.7 mm
Max. Inside Diameter After Recovery
0.250 Inches
6.4 mm
Nominal Wall Thickness After Recovery
0.30 mm
0.012 Inches
Shrink Ratio
2:1
Operating Temperature Range
-55 to +175 ºC
Military Specification
Lead - Free
RoHS Compliant
Color
Clear (C)
Standard Package
4 feet
Physical
Min. Tensile Strength (ASTM D638)
5000 psi
Min. Elongation (ASTM D638)
150 %
Max. Specific Gravity (ASTM D792)
1.8
Low Temperature Flex @ -55° C (AMS-DTL-23053)
No Cracking
Heat Shock @ 300° C, 4 hrs. (AMS-DTL-23053)
No Cracking
Min. Elongation (ASTM D638)
100 %
Min. Secant Modulus (ASTM D882)
100000 psi
Max. Deformation @ 150° C 1 hr. (%) (UL 224)
50
Longitudinal Change (AMS-DTL-23053)
±10 %
Electrical
Min. Dielectric Strength (ASTM D876)
800 V/mil
Min. Volume Resistivity (ASTM D876)
1.0 x 10
13
ohm-cm
Chemical
Min. Elongation (UL 224)
70% of unaged value
Max. Water Absorption (ASTM D570)
0.5 %
Min. Tensile Strength (AMS-DTL-23053)
5000 psi
Flammability (UL 224 VW-1)
Pass
Nominal Shrink Temperature
170 ºC
Site created by
ThomasNet Web Solutions
, a division of
ThomasNet.com